If you do not find the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. For some components, if you install in the wrong orientation, the components will not work properly. MS Motherboard The motherboard replaced an existing defective motherboard without any problems. I couldn’t believe it was that easy. Line In is used for external CD player, Tape player, or other audio devices. Make sure to raise the lever up to a degree angle.

Uploader: Arashir
Date Added: 19 August 2007
File Size: 50.11 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 13004
Price: Free* [*Free Regsitration Required]

MSI MS Specifications |

The plastic clip at each side of the DIMM slot will automatically close. If you do not find the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. Don’t show me this message again.

Mount the fan on top of the heatsink. The number of pins on either side of the breaks are different. Locate the CPU and its retention 2. Chapter 2 Memory The mainboard provides 2 slots for pin, 2. To operate properly, at least one DIMM module must be installed.

Last Drivers  TSSTCORP CDRW DVD TSL462D ATA DEVICE DRIVER DOWNLOAD

Order 1 Order Press the CPU down firmly into the socket and close the lever. You may also like. MS Motherboard The motherboard replaced an existing defective motherboard without any problems.

To clear the password, open the jumper and restart your computer.

MSI Xenon, Socket , Intel (MS) Motherboard | eBay

Skip to main content. You can attach a serial mouse or other serial devices to this port. If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. IDE1 can connect a Master and a Slave drive.

MSI Xenon, Socket 478, Intel (MS-6577) Motherboard

It introduces a 66MHz, bit channel for the graphics controller to directly access main memory and provides three levels of throughputs: Hardware Setup Fan Power Connectors: Mic is a connector for microphones.

For some components, if you install in the wrong orientation, the components will not work properly. I am now able to retrieve and save all of my pictures and important documents that would have cost much more to have retrieved elsewhere.

Onboard Peripherals h Onboard peripherals include: Mic is a connector for microphones. The power connector supports instant power on function which means that system will boot up immediately when the power supply connector is inserted on the board.

Last Drivers  LINKSYS WIRELESS G NOTEBOOK ADAPTER WPC54G VER 3.1 DRIVER DOWNLOAD

CPU Page 8 – Cpu installation procedures for socket I plugged in all the components from the old motherboard, swapped the processor and memory over and within 20 to 30 minutes the computer was operating again.

It was certainly cheaper than replacing the computer, even if it only continues to work for another year. It supports three-pin head connector.

Something wrong because do not communicate with monitor. Then push down the power supply firmly into the connector.

Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused. To operate properly, at least one DIMM module must be installed. Locate the CPU and its retention Position the heatsink onto the reten- mechanism on ms-6577 motherboard. Enter text from picture: